Boundary Waters Quetico Forum :: Group Forum: Do It Yourself Gear :: DIY Portage Pads / Yoke Pads
|
Author | Message Text | ||
muddyfeet |
Here are the DIY portage Pads: Materials: -1x4 board(3/4" actual thickness). 16" length to be cut into two pieces. Unfinished pine is fine. I used a piece of scrap that I had previously used to test stain. -1/2 yard of backed Vinyl. I found mine in the discount scrap pile at JoAnn Fabrics for $1.50 . You need a piece at least 25"x 17" -Polyester or synthetic batting/ pillow stuffing. Again the discount scrap at JoAnn was the source of a small piece instead of a whole package. I used some that was 2" thick, and I stacked 3 layers of it per pad to make it nice and firm. For 2" batting, that's a piece at least 12" x 17" to make one pair of pads. - Staples and staple gun. - (4) 1/4" x 2.5" bolts, nuts, and washers. -Sewing machine and polyester thread (cotton thread will rot when wet outdoors) -glue. any kind, really, as it's temporary. -2 beers: One to sip while you're working, and one to celebrate the accomplishment as you stare at your new portage pads. |
||
muddyfeet |
First, cut your materials according to the drawing: -Wood is 3.5” x 8 x 3/4” for each piece. Drill 1/4” holes as shown and insert the bolts in each hole. If they aren’t tight you can glue them in, but it doesn’t really matter as you’ll be bolting them down tight anyway. -Batting is 4” x 8.5” for each piece (to be stacked 3 high in each pad). -Vinyl is to be rough cut to 12.5” x 17” for each piece. |
||
muddyfeet |
Fold it into a box (inside-out at this point) and sew the sides together. Now you can trim down the seams, removing most of the yellow flaps. You can fold and sew the side-flaps into seams as shown for a slightly nicer finish, but it will be on the backside of the pad so you’ll never see it anyway. Invert the box so the right side is facing out. Stack the batting pads inside, and then the wood blocks, with the bolts facing out, of course. |
||
muddyfeet |
Drill holes in the yoke and mount where you like, using the nuts and washers. Have that second beer as you proudly stare and imagine how awesome it will be carrying it down the portage trail. |
||
Bannock |
I've made some too but I simply wraped the vinyl arroung the padding. Mine of course then had the christmas package look. I didn't need the pattern or sewing machine, but your's looks very professional. |
||
KevinL |
|
||
SaganagaJoe |
|
||
schweady |
quote SaganagaJoe: "Great set of instructions. Thanks for posting them here for our benefit. " +1 Many of us have made sets of these, but that last stretch-and-staple step has always meant that mine ended up as a very functional set but with that kidney bean look. Nice job. How did you arrive at the amount of batting to use? Are they super comfortable, like maybe a Bourquin brand? |
||
muddyfeet |
quote schweady: "quote SaganagaJoe: "Great set of instructions. Thanks for posting them here for our benefit. " Thanks, I very scientifically "stuffed it in there until it felt right." It's pretty firm, but you need that firm cush with 40lbs bouncing on your acromion. I used it for the week and it was fine. Longest that trip was a 240rod. I think the polyester/synthetic batting is important versus a foam rubber or something. I was running around the fabric store tightly squishing up all sorts of material and placing body weight on it against a countertop. This worked the best and makes them feel very close to a commercial pad; and if you cut it square it holds its shape pretty well. More importantly, my brother in law was happy with it, so I have a chance at borrowing the canoe again! |
||
1JimD |
I've made my own, and definitely not as nice as yours. I'll see if I can sweet talk my wife into sewing for me. Jim |