|
Boundary Waters Quetico Forum Gear Forum Sawyer Canoe repair question |
Author
Text
01/30/2020 08:03PM
Hi all,
New to the forum. came upon it researching a newly acquired boat.
I recently picked up a 1982 Sawyer Charger. Pretty certain it's the fiber glass as opposed to the kevlar.
It is in good shape with the exception of some damage on the bow. See photos. Curious if anyone has thoughts on the best way to repair the damage. I'm assuming I need to get things fixed up prior to getting it on the water.
Appreciate any and all guidance.
New to the forum. came upon it researching a newly acquired boat.
I recently picked up a 1982 Sawyer Charger. Pretty certain it's the fiber glass as opposed to the kevlar.
It is in good shape with the exception of some damage on the bow. See photos. Curious if anyone has thoughts on the best way to repair the damage. I'm assuming I need to get things fixed up prior to getting it on the water.
Appreciate any and all guidance.
01/31/2020 01:06AM
The most common canoe repair out there! There are many schools of thought about skid plates. Check out YouTube or other forums that are more specific to builders. Mike McCrea over at Canoetripping.net is the absolute expert IMO. He has done many wonderful right-ups and seems to be constantly researching and testing better methods and materials for this. The most common mistake DIYers make is to use too much resin which adds unnecessary weight. Peel ply is a good idea to help with this. There are many small shops around that will do this for you, however it is easy to do yourself. Be warned, skid plates are like the gateway drug of the canoe building world!
01/31/2020 06:43AM
I would re-gel it. Skids can be messy, and are generally add weight. Just down the road from you is a supplier and would have the materials you need. I'm certain there are experts in your area as well that can help with the prossess.
http://www.restexcomposites.com
Composite supply near Matt
http://www.restexcomposites.com
Composite supply near Matt
Good judgment comes from experience, and a lot of that comes from bad judgment.
02/01/2020 10:15AM
I would just slap a nice trim skid plate on it (as in the McCrea vids), but first, I would fill in/level out the chip outs with some West System/Microballon mix (you can Google that). I never use the pre-made Kevlar felt skid plate kits on flatwater boats. Too bulky and messy. I cut my own from regular felt and kevlar cloth.
"What could happen?"
02/01/2020 10:44AM
cowdoc: "I would just slap a nice trim skid plate on it (as in the McCrea vids), but first, I would fill in/level out the chip outs with some West System/Microballon mix (you can Google that). I never use the pre-made Kevlar felt skid plate kits on flatwater boats. Too bulky and messy. I cut my own from regular felt and kevlar cloth."
I've had success with filling gouges with JB Weld epoxy (I always have that around). You'll want to paint it for aesthetics though. I'd consider a skid plate only if you have to--I have two gel-coated glass boats that I've had for 25-35 years that have held up really well without them, and I don't baby my boats (I don't crash them on shore, but I don't wet foot either). Their gouges aren't quite as bad as what is shown, and I've patched them with no problem. I'd consider skid plates as a last resort--they add weight, may be unnecessary if you take care of your boat, and they affect the performance of the boat.
Subscribe to Thread
Become a member of the bwca.com community to subscribe to thread and get email updates when new posts are added. Sign up Here