|
Boundary Waters Quetico Forum Listening Point - General Discussion Refinished my Souris River Canoe
|
Author
Text
10/05/2026 02:51PM
I just refinished my 2004 Green LeTigre Souris River Q16 this weekend and it looks a lot closer to new than it did a few days ago. I purchased this canoe from a board member in 2017 and he had previously done a patch and refinished it himself once.
This was my first time refinishing it and I was hesitant to attempt it myself. But, it was long overdue and after reading all of the previous threads on here, watching the old videos from Joe (Redrock) that can still be found on Youtube, and reading directions on both the Souris River and Killarney Outfitters websites I felt like I was ready to have a go at it.
It looks pretty good now for a 22 year old canoe.
I used the West Systems 105 Epoxy Resin and 207 hardener. The pumps were the cats meow and made mixing so easy. I'm glad I took the advice to mix smaller batches instead of all at once. That would have been a disaster if I did. I did two batches of 4 pumps and 1 batch of 3 pumps. I'm also glad that I used a foam brush after rolling on each sections to tip and eliminate most of the bubbles.
This was my first time refinishing it and I was hesitant to attempt it myself. But, it was long overdue and after reading all of the previous threads on here, watching the old videos from Joe (Redrock) that can still be found on Youtube, and reading directions on both the Souris River and Killarney Outfitters websites I felt like I was ready to have a go at it.
It looks pretty good now for a 22 year old canoe.
I used the West Systems 105 Epoxy Resin and 207 hardener. The pumps were the cats meow and made mixing so easy. I'm glad I took the advice to mix smaller batches instead of all at once. That would have been a disaster if I did. I did two batches of 4 pumps and 1 batch of 3 pumps. I'm also glad that I used a foam brush after rolling on each sections to tip and eliminate most of the bubbles.
Ride EZ
10/05/2026 06:37PM
Well done! Looks really good; the green really comes alive.
An hour ago I put away the second of the two canoes I've been working on all summer...nice to be finished. I think I used 1.25 gallons of resin, 30+ pieces of glass, two new gunwales, one new thwart and about 140 rivets to do them both.
Getting the garage back is a nice bonus.
An hour ago I put away the second of the two canoes I've been working on all summer...nice to be finished. I think I used 1.25 gallons of resin, 30+ pieces of glass, two new gunwales, one new thwart and about 140 rivets to do them both.
Getting the garage back is a nice bonus.
"I don't care what you believe. I care what you can prove." -Philosopher & Mathematician JJJ
10/06/2026 06:30AM
Very nice!
And oh so satisfying.
I followed the same journey as you a few years ago - bought a used, beat up looking SR 17 that was otherwise structurally sound. Once the project was completed, it looked like it was in showroom condition.
I did all of the work outdoors. The one thing I discovered is that when the coat of epoxy is still tacky, it's like a giant strip of flypaper. I didn't even recognize most of the bugs it collected. They were tiny but created miniscule, almost invisible, imperfections in the surface.
And oh so satisfying.
I followed the same journey as you a few years ago - bought a used, beat up looking SR 17 that was otherwise structurally sound. Once the project was completed, it looked like it was in showroom condition.
I did all of the work outdoors. The one thing I discovered is that when the coat of epoxy is still tacky, it's like a giant strip of flypaper. I didn't even recognize most of the bugs it collected. They were tiny but created miniscule, almost invisible, imperfections in the surface.
10/06/2026 03:01PM
Argo: "I did all of the work outdoors. The one thing I discovered is that when the coat of epoxy is still tacky, it's like a giant strip of flypaper. I didn't even recognize most of the bugs it collected. They were tiny but created miniscule, almost invisible, imperfections in the surface."
YES! Even in an open garage this can happen...
DUCKS - looks amazing. What kind of sander did you use?
Wherever there is a channel for water, there is a road for the canoe. -Thoreau
10/07/2026 06:14AM
BWPaddler: "Argo: "I did all of the work outdoors. The one thing I discovered is that when the coat of epoxy is still tacky, it's like a giant strip of flypaper. I didn't even recognize most of the bugs it collected. They were tiny but created miniscule, almost invisible, imperfections in the surface."
YES! Even in an open garage this can happen...
DUCKS - looks amazing. What kind of sander did you use?"
Haha. Yes the flypaper fun. I did the epoxy right next to the open double door because our driveway isn’t level and I started getting bugs and white fluffies sticking to it. Closing the double door and keeping the single door open for ventilation eliminated more fluffies, but I still was picking off bugs.
I used an orbital sander. If you zoom in on the picture of the canoe showing it completely sanded, you can see the sander laying on the driveway in the background.
One problem I had with doing the epoxy part there was that it was hard to see what I was doing on the side of the canoe that was in the garage.
Ride EZ
10/07/2026 06:39AM
DJtheAngler: "Crazy impressive Ducks. What did this project cost to undertake all in? Would be curious as I am in the market for a new canoe with the budget of a used canoe haha."
Around $140 ish. Foam roller, foam brush, and acetone were cheap and then the 105 epoxy/207 hardener with pumps was $120something. The smallest containers have enough for maybe 6 canoes (from what I’ve read) and it’s supposed to be good for a few years.
Now that I have the epoxy and know what I’m getting into I’ll refinish it again a lot sooner.
Ride EZ
10/09/2026 09:17PM
ducks: "DJtheAngler: "Crazy impressive Ducks. What did this project cost to undertake all in? Would be curious as I am in the market for a new canoe with the budget of a used canoe haha."
Around $140 ish. Foam roller, foam brush, and acetone were cheap and then the 105 epoxy/207 hardener with pumps was $120something. The smallest containers have enough for maybe 6 canoes (from what I’ve read) and it’s supposed to be good for a few years.
Now that I have the epoxy and know what I’m getting into I’ll refinish it again a lot sooner. "
A word of warning- frequent epoxy application will add noticeable weight.
Nobody exists on purpose, nobody belongs anywhere, everybody’s going to die.
10/11/2026 09:11PM
Banksiana: "ducks: "DJtheAngler: "Crazy impressive Ducks. What did this project cost to undertake all in? Would be curious as I am in the market for a new canoe with the budget of a used canoe haha."
Around $140 ish. Foam roller, foam brush, and acetone were cheap and then the 105 epoxy/207 hardener with pumps was $120something. The smallest containers have enough for maybe 6 canoes (from what I’ve read) and it’s supposed to be good for a few years.
Now that I have the epoxy and know what I’m getting into I’ll refinish it again a lot sooner. "
A word of warning- frequent epoxy application will add noticeable weight.
"
This shouldn't be the case if you sand off the previous application, no?
10/12/2026 10:58AM
ducks: "BWPaddler: "DUCKS - looks amazing. What kind of sander did you use?"
I used an orbital sander. If you zoom in on the picture of the canoe showing it completely sanded, you can see the sander laying on the driveway in the background. "
I see it. Mine is slightly smaller, but the issue I have is that it triggers my carpal tunnel inflammation or something and my hands end up numb for some time after using it. :( Maybe I have to hire that part out to someone.
Wherever there is a channel for water, there is a road for the canoe. -Thoreau
Subscribe to Thread
Become a member of the bwca.com community to subscribe to thread and get email updates when new posts are added. Sign up Here

Search BWCA.com
Donate