BWCA Yokes on me Boundary Waters Group Forum: Solo Tripping
Chat Rooms (0 Chatting)  |  Search  |   Login/Join
* For the benefit of the community, commercial posting is not allowed.
Boundary Waters Quetico Forum
   Group Forum: Solo Tripping
      Yokes on me     

Author

Text

jb in the wild
distinguished member(2651)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/21/2011 11:11PM   (Thread Older Than 3 Years)
I have not had to portage my solo yet but today I took a look at my yoke. It looks like it was made for a little kid. Not nearly wide enough I can't get my neck in it. Any suggestions on after market yolks for some one with a big neck and wide shoulders?

JB
 
      Print Top Bottom Previous Next
08/21/2011 11:53PM  
Have you tried a set of clamp on pads? I have these and mounted them wide and angled, for much better comfort! They are thick and long enough to space your head away from the yoke itself.

butthead
 
jb in the wild
distinguished member(2651)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/22/2011 12:03AM  
Didn't even think of using the pads from my tandem duh. Something to try tomorrow.
Thanks Ken sometime the answers are right in front of you.

JB
 
yellowcanoe
distinguished member(4984)distinguished memberdistinguished memberdistinguished memberdistinguished memberpower member
  
08/22/2011 12:04AM  
CVCA pads.

You want visibility and getting the canoe off your neck. Elevate. You dont specify your canoe width nor weight. But these work well between 30-50 lbs. Below that the pads are a little too bouncy for me.

http://gear4portaging.com/ You can angle them too.
 
jb in the wild
distinguished member(2651)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/22/2011 12:31PM  
I saw this and thought it might be worth trying. Looks like a pretty cool set up. Easy in and out of the canoe.

JB yolk
 
Minnesotian
distinguished member(2309)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/22/2011 01:08PM  
quote jb in the wild: "I saw this and thought it might be worth trying. Looks like a pretty cool set up. Easy in and out of the canoe.


JB portage pads and yolk "


I have marked down that yoke for use as well. I have never tried it and I hope someone can chime in that have used it before.
 
08/22/2011 02:08PM  
Depending on seat height....does that give you enough room for head clearance??
 
yellowcanoe
distinguished member(4984)distinguished memberdistinguished memberdistinguished memberdistinguished memberpower member
  
08/22/2011 02:32PM  
Bryan states it makes the boat a little stern heavy. I insist on the boat being perfectly balanced on me when I walk.I use stern and bow tag lines held with a quick release buckle so that I dont have to hold the boat...with my hands high. I can walk with a normal arm swing and the hand holding the lines has a gentle grip..you can pull back to pull the bow down and a little forward to pull the stern down.

So far I have found removable yokes the most versatile for this reason. I have one yoke and nine solos.
 
PineKnot
distinguished member(2021)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/22/2011 02:57PM  
quote cowdoc: "Depending on seat height....does that give you enough room for head clearance??"


Also need to think about pack clearance. If your pack rides head level, the seat may interfere with the pack.
 
SevenofNine
distinguished member(2472)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/23/2011 01:20PM  
quote jb in the wild: "I have not had to portage my solo yet but today I took a look at my yoke. It looks like it was made for a little kid. Not nearly wide enough I can't get my neck in it. Any suggestions on after market yolks for some one with a big neck and wide shoulders?JB"


A guy who has no neck cannot claim a big neck. :)

I would suggest some clamp on pads might do the trick. You can adjust the location where they would land on your shoulders. Bell sells some but you can buy them other places as well. Good luck.
 
HighPlainsDrifter
distinguished member(2365)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/23/2011 08:26PM  

You might be ahead by making your own.

Trace an existing yoke pattern onto card board. Cut it out and play around with neck clearance. Find a nice hunk of white ash, trace your pattern and finish it off.

I fashioned my yoke after Bannock's design. By doing it yourself, you end up with a yoke custom made to the canoe and your neck. The pads are Chosen Valley pads.

 
08/23/2011 09:42PM  
order a yoke from eds , get some of the clamps from Spring Creek and a set of clamp on pads. It doesnt take long to make your own.
 
08/23/2011 10:23PM  
the spring creek clamps are perfect...unlike this photo. :)

 
08/24/2011 12:16AM  
Or even more head and pack room....
 
jb in the wild
distinguished member(2651)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/26/2011 03:09PM  
quote SevenofNine: "
quote jb in the wild: "I have not had to portage my solo yet but today I took a look at my yoke. It looks like it was made for a little kid. Not nearly wide enough I can't get my neck in it. Any suggestions on after market yolks for some one with a big neck and wide shoulders?JB"



A guy who has no neck cannot claim a big neck. :)


I would suggest some clamp on pads might do the trick. You can adjust the location where they would land on your shoulders. Bell sells some but you can buy them other places as well. Good luck."


OK for a guy who want to borrow my canoe calling me no neck, even if it is true, will not help your case.
Also if you haven't got to your emails, yes you can borrow my SR.


JB
 
fraxinus
distinguished member(703)distinguished memberdistinguished memberdistinguished memberdistinguished member
  
08/26/2011 06:32PM  
quote Banksiana: "Or even more head and pack room.... "


Looks nice, i can't tell from the picture, how does the yoke attach to the gunnels? Interesting, I could use a little more head clearance.
 
      Print Top Bottom Previous Next