The Damselfly Cedar strip project (43 photos)

Pulling strips back to the forms by HighPlainsDrifter

Pulling strips back to the forms

Close up of bow area by HighPlainsDrifter

Close up of bow area

Damselfly 13 finished by HighPlainsDrifter

Damselfly 13 finished

Finished project by HighPlainsDrifter

Finished project

Finished project by HighPlainsDrifter

Finished project

Finished project by HighPlainsDrifter

Finished project

Inside completed by HighPlainsDrifter

Inside completed

Inwales and outwales on by HighPlainsDrifter

Inwales and outwales on

before varnish by HighPlainsDrifter

before varnish

Fitting the pieces together by HighPlainsDrifter

Fitting the pieces together

Fitting the bow deck by HighPlainsDrifter

Fitting the bow deck

Deck plate with groove for inlay by HighPlainsDrifter

Deck plate with groove for inlay

Close up gunwales by HighPlainsDrifter

Close up gunwales

Dry fit of gunwales by HighPlainsDrifter

Dry fit of gunwales

glue up of spacers by HighPlainsDrifter

glue up of spacers

Beveled spacer by HighPlainsDrifter

Beveled spacer

Rough cut thwart by HighPlainsDrifter

Rough cut thwart

Bow of damselfly by HighPlainsDrifter

Bow of damselfly

Off the molds by HighPlainsDrifter

Off the molds

1st fill coat, stems wrapped by HighPlainsDrifter

1st fill coat, stems wrapped

Canoe draped in fiber glass by HighPlainsDrifter

Canoe draped in fiber glass

by HighPlainsDrifter

by HighPlainsDrifter

Cutting the bow sheer line by HighPlainsDrifter

Cutting the bow sheer line

Select a page to view: 1 2 next >>