Click to View the Full Thread

Author	Message Text
JoshP	03/01/2019 08:13AM   These were both used on Northstar Magics. One with wood gunnels and the other with aluminum gunnels. I have looked at many other Northstar Canoes and there isn't a lot of consistency to them. Maybe that has changed as of late. To drill new holes isn't that hard, as these are basically a spacer block.
Ragged	03/01/2019 06:29AM   JoshP: "Ragged: "Do you happen to know what the center to center distance of the bolts are? " The darker colored one is 8" spacing. The lighter colored one has 8" spacing with an additional hole that's 8-3/16" spacing." Thanks Josh, I have an older Magic that I occasionally set up for kneeling, If I can make the shorter ones work I’ll take them. I’ll get out to the shed and take some measurements this weekend
Ragged	02/25/2019 11:00PM   Do you happen to know what the center to center distance of the bolts are?
JoshP	02/26/2019 07:40AM   Ragged: "Do you happen to know what the center to center distance of the bolts are? " The darker colored one is 8" spacing. The lighter colored one has 8" spacing with an additional hole that's 8-3/16" spacing.
JoshP	02/23/2019 06:00PM   I have 2 sets of used Northstar Canoes kneeling seat drops made of walnut wood with hardware. The lighter color set has a couple notches made into the wood to clear the rivets/screws that come on aluminum gunnels. $25 for each set with hardware and one sticker shipped. Northstars Kneeling Seat Drops