Author |
Message Text |
foxfireniner
|
trailcheif: "AmarilloJim: "I use an Albright knot for superline to fluorocarbon. I use a really small spro swivel for leadcore to leader. Cut the last 3-4" of lead out first." +1 on the Albright. Also have used the Double Uni. But my go to now is the Modified Albright, think it is also called the Alberto Knot. Here is a video that makes it pretty easy to learn. Modified Albright "
I use the albright. Where in the boundary waters are you using lead core?
that is one of my salmon trolling lines.
|
thegildedgopher
|
foxfireniner:I use the albright. Where in the boundary waters are you using lead core?
that is one of my salmon trolling lines. "
It can be effective anywhere lake trout are holding deeper than your crankbaits run. There are other ways, but I prefer leadcore line over snapweights, bottom bouncers, three-ways, etc.
|
bassman
|
I hate tying a knot with two different types of line. If one of the lines is short enough, i.e. a leader, connect the two using a loop to loop connection. Tie a surgeon's loop on the end of each line and connect them together via the loops.
|
Jerlane
|
Check out this knot called the FG knot. It's bomber and pretty easy to do once you get the hang of it.
FG Knot
|
trailcheif
|
AmarilloJim: "I use an Albright knot for superline to fluorocarbon. I use a really small spro swivel for leadcore to leader. Cut the last 3-4" of lead out first." +1 on the Albright. Also have used the Double Uni. But my go to now is the Modified Albright, think it is also called the Alberto Knot. Here is a video that makes it pretty easy to learn. Modified Albright
|
ghostrider179
|
What knot does everybody like for mono to lead core and mono to braid
|
thegildedgopher
|
mono/flouro to braid: double uni quot.
mono/flouro to lead: willis knot. (this can be tricky. a stiffer mono or flouro will help as you feed into the empty sheath of the leadcore. The clipped sheath needs to be crisp and not frayed. If you fail a few times, or if the leader keeps poking out the side of the sheath, it's time to snip the end and start fresh.)
I like both of these as they cast and reel through the guides, through level winds and bails, and up onto the spool just fine. In some cases I'll use a swivel intead of the double uni on the braid setups.
|
AmarilloJim
|
I use an Albright knot for superline to fluorocarbon. I use a really small spro swivel for leadcore to leader. Cut the last 3-4" of lead out first.
|