Click to View the Full Thread

Boundary Waters Quetico Forum :: Gear Forum :: Skid plates?
 
Author Message Text
LindenTree3
12/13/2017 11:45AM
 
nctry: "quote egknuti: "I would not put skid plates on. Wait until it’s worn down before doing any maintenance . Plus, you can apply extra layers of Kevlar and keep it looking like new instead of adding the thick ugly skid plated."








I'd try keel easy if you don't like the thick Kevlar felt. I saw an outfitter put duct tape on a couple canoes a while back. Maybe try that as a means to see how much wear you might anticipate. If you have an internal, I'd not do anything besides, but don't wait until it's wore thru to add something."



I use Gorilla tape for skid plates.
It can easily be replaced and its lightweight.
It is also the only option I could find for my Alley folding canoe. Its black and you can hardly see it on my Alley.


 
nctry
12/10/2017 06:58PM
 
quote egknuti: "I would not put skid plates on. Wait until it’s worn down before doing any maintenance . Plus, you can apply extra layers of Kevlar and keep it looking like new instead of adding the thick ugly skid plated."





I'd try keel easy if you don't like the thick Kevlar felt. I saw an outfitter put duct tape on a couple canoes a while back. Maybe try that as a means to see how much wear you might anticipate. If you have an internal, I'd not do anything besides, but don't wait until it's wore thru to add something.
 
mjmkjun
12/08/2017 02:26PM
 
quote nctry: "I only put one on the front of my solo. I know how abusive I am. Not that I try to be, but rocks happen as you know. I've repaired too many of used canoes that used up those internal skids. Of course these are mainly old rentals, I just know how I am. When it comes to missing rocks, I'm like Mr Magoo."
Agree. I didn't install one on the stern of Prism. Now I wish I would have. Spring '18 will install one. When fatigued I have become awfully clumsy, less agile on rocky landings. Mudro to Fourtown/1st portage comes to mind.

 
Pinetree
12/08/2017 09:37AM
 
quote egknuti: "I would not put skid plates on. Wait until it’s worn down before doing any maintenance . Plus, you can apply extra layers of Kevlar and keep it looking like new instead of adding the thick ugly skid plated."


agree.
I have at various times when the bow or stern get a little wear I just take a little clear fiberglass epoxy and put on a thin layer. Works great for me.
 
mschi772
12/08/2017 09:43AM
 
This thread reminded me that I want to put skid plates on my Novacraft Haida. Gotta repair some gel coat damage first though--forgot about that too. Bleh, I don't wanna, but it's gotta get done.
 
yellowcanoe
12/05/2017 05:29PM
 
Internal skid plates are extra fabric.. you can still gouge the skin but there is more stuff to go through inside before anything leaks.


Skid plate installation requires sanding.. Why would you want to do that when you can do that by tripping? Add them later if you must


There is lots of reinforcement in the stems. Skid plates were marketed to assuage people that were afraid stem wear would make the craft sink or eternally damage it.


Most are clunky and induce drag.. You can do skid plates later with a nice piece of fiberglass which is more abrasion resistant.


So my vote is nyet
 
egknuti
12/05/2017 07:13PM
 
I would not put skid plates on. Wait until it’s worn down before doing any maintenance . Plus, you can apply extra layers of Kevlar and keep it looking like new instead of adding the thick ugly skid plated.
 
nctry
12/05/2017 02:08PM
 
I only put one on the front of my solo. I know how abusive I am. Not that I try to be, but rocks happen as you know. I've repaired too many of used canoes that used up those internal skids. Of course these are mainly old rentals, I just know how I am. When it comes to missing rocks, I'm like Mr Magoo.
 
old_salt
12/04/2017 11:05AM
 
The skid plates were incorporated in the manufacturing of the canoe. You can’t see them. Additional skid plates are not needed. I’ve had one for over 10 years and have no need for additional protection. You could always add them later if you feel the need.
 
unshavenman
12/04/2017 11:32AM
 
Yep, no need for additional skid plates on an SRQ 17. As with any lovely canoe, avoid hard landings and you will be fine.
 
Lotw
12/04/2017 11:48AM
 
ok, no skid plates it is!


 
timatkn
12/04/2017 12:52PM
 
quote Lotw: "ok, no skid plates it is!

"



Agree. I have a Souris River with internal skid plates I got new in 2002, averages 2-3 trips per year plus local trips. Still good without any additional skid plates. YMMV, I don’t abuse gear, but I use it hard.


T
 
Lotw
12/04/2017 01:16PM
 
I'm not sure where I fall in that use/abuse ratio but there's a lot of rocks in Ontario with blue marks from my Old Town
 
Lotw
12/04/2017 09:24AM
 
I just picked up a new to me Souris River Q17. Should I add skid plates? I kind of feel like I should. I'm not super concerned about weight since this thing is roughly half of what my Old Town is.
 
walllee
12/04/2017 09:28AM
 
I would if weight is not a concern. That added protection could come in handy sometime.
 
eroom
12/04/2017 09:58AM
 
The Q17 is made with a skid plate. Of coarse you could beef it up, if you feel the need.
 
Lotw
12/04/2017 10:20AM
 
quote eroom: "The Q17 is made with a skid plate. Of coarse you could beef it up, if you feel the need."


I was told it had internal skid plates........ explain that to me.