Boundary Waters Quetico Forum :: Gear Forum :: Corona 21
|
Author | Message Text | ||
RTurner |
|
||
RTurner |
|
||
sns |
mpeebles: "Does anyone know if someone makes a lightweight plastic scabbard for a Corona 21" saw......model RS 7160. I can find leather and "rubberized" belting scabbards (by Weaver) but might like something lighter. That's a great saw. I bought it after hearing that some Hot Shot firefighters use the Corona as the best saw to get through stuff fast, and I don't need the cuts to look pretty. I think it's more than I want to carry if I am covering ground, but a light scabbard might help. I seem to recall you telling me you'd been quad-portaging in WCPP two years ago...so weight may be important! Let us know how the scabbard works out. Cheers |
||
mpeebles |
Safe travels.......mike |
||
houseofspam |
RTurner: "I use a plastic bar guard for a chain saw." I made a leather sheath for my Corona 21...I may have to switch to something like your solution. I just looked around on Amazon and there are plenty of sizes/shapes/colors of bar covers available that would work for the Corona. I've never understood the fascination with the folding saws. The Corona is about the same weight. So it's really only the sheath that makes it heavier. For the extra half pound or so you get a larger saw that cuts much better without any moving parts or bits you could lose. I selfishly hope that people keep using the folding saws, though...I always find plenty of wood available that was too big for the little camp saws to cut. |
||
SOVOS |
RTurner: " " How much does this weigh with the chainsaw cover? |
||
wingnut |
Here's a couple of pics of a home made scabbord That I weighed when finished. I'm not sure If that falls into the light weight range but it was an Interesting project for me. |
||
mpeebles |
Thanks.....Mike |
||
mpeebles |
Thanks again........Mike |
||
jdrocks |
mpeebles: "Does anyone know if someone makes a lightweight plastic scabbard for a Corona 21" saw......model RS 7160. I can find leather and "rubberized" belting scabbards (by Weaver) but might like something lighter. i've tried most of the known tripping saws, and consider the big Corona the premier saw for this purpose. i use the Weaver leather scabbard with this saw and it rides in the axe pocket and behind the cinch straps on the outside of the pack, instantly available when needed. the leather scabbard gets molded to the shape of the Corona when wet, then keeps that shape for a tight custom fit, that saw is not going to fall out. the scabbard itself is attached to the pack straps with the included clip. any difference between the weight of this scabbard and an alternate is negligible. if you do choose an alternate, pick a good one, the saw is aptly called the Razor, and would be happy to leave a mark on you and/or your gear if the blade is not protected properly. the saw has been an essential piece of gear on many a trip, i wouldn't travel without it. |