Boundary Waters Quetico Forum :: Gear Forum :: Irwin Saw
|
Author | Message Text | ||
okinaw55 |
butthead: "I have 2 collapsing backpacker saws. The 15 inch Irwin is a bit lighter at 14.8 ounces This is a blast from the past. I have the same sheath you show in your picture. I can't remember who made them though. I remember at the time thinking I better stock up on these saws that match my sheath. Bought 5 of them. |
||
WhiteWolf |
pamonster: "Another Irwin saw with the Ragged sheath here. +1. also thanks to Mitch (DicecupMaker) RIP. for making an awesome sheath. Seen below laying on log. I will add that heavily used sites that are very picked over for wood- an Irwin saw and axe can make a big difference in time it takes to produce good dry wood. |
||
butthead |
okinaw55: "butthead: "I have 2 collapsing backpacker saws. The 15 inch Irwin is a bit lighter at 14.8 ounces Not used as much anymore as I stopped canoe tripping, still a favorite part of a well enjoyed past! The maker is a forum member, ragged from Minneapolis, MN. butthead |
||
joewildlife |
Joe |
||
PortageKeeper |
|
||
BearBurrito |
butthead: "The IRWIN Tools Marathon 2011201 15-inch ProTouch Coarse Cut Saw is what I have and like! Particularly proud of the Ragged-made sheath. That is the one I have as well. Except I haven't been able to get my hands on a Ragged sheath yet. |
||
AlexanderSupertramp |
|
||
Minnesotian |
I got the Irwin Saw and use it all the time. I was also lucky enough to get one of Ragged's sheaths for it. I used to use a Sven Saw before it, but never really liked all the pieces that could get lost, the limit of how thick of a log you could cut through, and all the potential points of failure on the Sven. Still have it though if I want to take it backpacking, but I find the Irwin cuts faster, no parts to lose, and its solidly built. |
||
mgraber |
|
||
butthead |
butthead |
||
lyontyl |
This seems like the complete opposite of what you would want in terms of savings space and such? |
||
fishonfishoff |
Same saw as Butthead, different protective device. |
||
plmn |
mgraber: "Agree with just getting the Agawa Canyon 21". Get the kit with sheath and extra blade. The agressive ranchers blade is wicked fast in dry wood, the all purpose is better with green wood and very good all around. I've had a few saws, this is the best I've found." I also love my Agawa Boreal 21, the main reason I got it over a Silky is because it's much more ergonomic. Though I suppose not quite as ergonomic as the contoured handles on the Irwin and Fiskars. And with the extra blade and sheath it cost 5x as much. |
||
ashlandjack |
|
||
okinaw55 |
|
||
OldScout48 |
Here is a picture of my saw and sheath. The sheath is just a flexible cutting board (the thicker, the better) that is folded in half long ways using a hot air gun to heat the plastic. Be careful with the heat as you can easily melt the plastic. I put a 1/4" thick wooden spacer inside the fold while heating it to give the sheath room for the saw teeth to move in and out. I then used the cardboard packing sheath to mark the lines to cut the edges of the sheath, give yourself an extra 1/4" to 3/8" so the you have room for the pop rivets. Add some webbing and a buckle and you are set to go. The other part of the buckle is on the other side of the sheath. |
||
schweady |
lyontyl: "Why would someone want this saw for the BWCA over a backpacking saw that can collapse into itself and take up less room? It's pretty flat, actually. |
||
scottiebaldwin |
unshavenman: "Frenchy19: "Get a Agawa Canyon Boreal 21 saw. I have the Irwin and the sheath also, but they have gathered dust since I purchased the Agawa. 17 ounces. Agawa " +1 with Frenchy19 and unshavenman. Different strokes for different folks I guess but nobody’s going to wrestle my Agawa Boreal 21 out of my hands. I bring that, a Council Tool pack axe, and a Gransfors Bruk Outdoor Axe with me on all my trips. I usually wood gnome the heck out of whatever site at which I’m staying. |
||
arnesr |
HNTNWGN: "Does anyone know if the IRWIN 2011201 and the Menards Masterforce MF-TDW4208 15" hand saws are the same? They both look pretty similar. I cant seem to find the IRWIN locally. Menards used to carry the IRWIN saw, but it looks like they are trying to push their own brand now. Who knows if it is the same saw rebranded. Speaking of Menards and saws, I have found this pruning saw to be hard to beat in terms of price and performance. It's a cheap, made in China saw, but it works well with an aggressive cut and comfortable grip. Out of stock at most stores, but perhaps they will restock come spring. On sale with the 11% rebate, I think I paid a whopping $2-$3 last season when I purchased a backup. I have been using this saw for at least 6 years now in combination with a Silky Bigboy. Pruning Saw |
||
HNTNWGN |
https://www.menards.com/main/tools/hand-tools/hand-saws-saw-blades/masterforce-reg-aluminum-handle-hand-saw/mf-tdw4208/p-3490591039995335-c-9123.htm |
||
AlexanderSupertramp |
HNTNWGN: "Does anyone know if the IRWIN 2011201 and the Menards Masterforce MF-TDW4208 15" hand saws are the same? They both look pretty similar. I cant seem to find the IRWIN locally. Couldn't answer that, but I have a few Masterforce saws that I have beat the ever-loving crap out of and they have held up well. |
||
houseofspam |
lyontyl: "Why would someone want this saw for the BWCA over a backpacking saw that can collapse into itself and take up less room? I think the logic is the opposite for canoe camping. There's no reason to use a backpacking saw unless you're extremely concerned with space and weight. Most canoe campers aren't. As stated by Knoozer: the weight and space savings is minimal. The cost difference can be significant. The backpacking saws also many more failure modes. I carry a 21" Corona razor tooth. It'll saw through a 2x4 in about 10 seconds. I collect plenty of wood left by previous campers that was too large for their saw. |
||
Captn Tony |
Thanks. |
||
WhiteWolf |
uqme2: "WhiteWolf: "I heat my home with wood. ALWAYS have IRWIN Saw and a small axe near my stove to make wood into what is needed. By near- I mean outside the front door on the landing. |
||
lyontyl |
|
||
plmn |
Sparkeh: "https://www.acehardware.com/departments/tools/hand-tools/hand-saws/2030501?store=11390&gad_source=1&gclsrc=ds Looks like a better alternative to me, assuming the teeth are as good. |
||
Sparkeh |
Fiskars looks like the new irwin. Includes a sheath. $23 at ace. |
||
unshavenman |
Frenchy19: "Get a Agawa Canyon Boreal 21 saw. I have the Irwin and the sheath also, but they have gathered dust since I purchased the Agawa. 17 ounces. Agawa " Same with me. Frenchy and I seem to be of like minds on a lot of things...... |
||
Castaway |
|
||
Unas10 |
OldScout48: "The 15 inch model seems to do the job. Price is good, pretty much takes care of most wood cutting jobs and it just seems to keep going. Love the creativity. |
||
schweady |
Of course, I've found a saw I like even better....... But, I'll let you do your own searching on this board... |
||
butthead |
1pound 10 ounces in the sheath. The length falls between the backpacking saws. Obviously the Irwin is wider but essentially not noticed on the side of my pack. The backpacking saws now gather dust and the Irwin gets carried/used. butthead |
||
gymcoachdon |
If I run in to a down tree on the trail, it is easy to slip the saw out and start cutting. I then know i have a clear path when I come back with the canoe. I do not have a sheath, I just reinforced the cardboard cover it came in with some duct tape! Still going 3 years later. I will say that I have only had to clear a portage twice, once in early June in the Q, and once in WCPP, also in June. It is still really handy processing firewood in camp. |
||
MRH |
|
||
AlexanderSupertramp |
Minnesotian: " I've never understood the hype on the Sven saw as a good backcountry tool honestly. I played around with one at Piragis last week and found it pretty frustrating (and that's with warm hands inside a building), I can't imagine fiddling about with that on a winter trip when you cant feel your fingers. Not to mention the loose wingnut that could get lost... Drop that in the snow and she's a goner, rendering it useless. There are better iterations of the folding bow saw out there these days. |
||
scottiebaldwin |
AlexanderSupertramp: "Minnesotian: " Hear, hear!! |
||
uqme2 |
In defense of Sven Saws, two Bungee Dealee Bobs or velcro straps and a thwart make for easy access and storage. While I'll admit a Sven may take an IQ of >85 to assemble and use properly, the wing nut is the same size as the nuts on my yoke pads. |
||
AlexanderSupertramp |
okinaw55: "The Irwin is a really good choice in my opinion. It holds up staying sharp well, is lightweight, and it's cheap. I still use mine." It's only 4 ounces heavier than the Silky Big Boy Outback, which was my original choice at first. But for $100... meh. |
||
Scout64 |
|
||
andym |
|
||
A1t2o |
Cutting firewood with a little folding saw has been on of my least favorite camp chores. Right up there with washing the dishes when the mosquitoes are thick. Once I figured out a good system with the Irwin and a hatchet (as a wedge only), gathering firewood was once again enjoyable and I didn't have to go so far out of my way to avoid cutting anything. |
||
Chuckles |
A1t2o: "Something I'm surprised isn't mentioned more is the grip. A folding saw works, but the Irwin gives you a mechanical advantage for the sawing action. " Irwin saw fan here, but I'm confused by the 'mechanical advantage' point above. Not trying to be a pain or mince words, but do you mean it is more comfortable in your hand, therefore it is easier to use? Or is there a different mechanical advantage I'm not aware of. |
||
uqme2 |
Chuckles: "A1t2o: "Something I'm surprised isn't mentioned more is the grip. A folding saw works, but the Irwin gives you a mechanical advantage for the sawing action. " Or is there a different mechanical advantage I'm not aware of. |
||
uqme2 |
WhiteWolf: "I heat my home with wood. ALWAYS have IRWIN Saw and a small axe near my stove to make wood into what is needed. You heat your home with wood and you saw/split it in your house? |
||
AmarilloJim |
|
||
pamonster |
Also use Sven, Bahco, Silky but tend to favor the Irwin. I like the handle. Much easier saw for me to use efficiently in my off hand too. As for packing; it fits great in or out of a pack. Honestly if you cant figure out how to pack a thin little saw like this you've got bigger problems. If going ultralight then no saw. But I was born in the north and a good axe and saw in the boreal forest is just how I like it. |
||
Knoozer |
|
||
Frenchy19 |
|
||
DeanL |
I'm not sure if Ragged still makes sheaths, but they're worth every penny and you can slip the saw on the side of any pack since it's very thin and the weight is a non issue. This was a downed cedar tree that was about 12" in diameter and lasted a whole trip for us. |
||
WhiteWolf |
|