Click to View the Full Thread

Author	Message Text
butthead	10/15/2020 08:15AM   I like that! Other combinations would also be helpful. Simple caps with tubing connections could be useful. I just glued together a cap for a Nalgene collapsible bottle, 3D printed would be cleaner and stronger. butthead
TechnoScout	10/15/2020 08:39AM   Trying to understand which part you made. Did you glue the nipple on to a nalgene cap?
TechnoScout	10/15/2020 10:35AM   TechnoScout: "Trying to understand which part you made. Did you glue the nipple on to a nalgene cap?" If you added a nipple to a stock cap, I think that is a better solution than printing a cap on a 3D printer.
butthead	10/15/2020 01:16PM   Just put up as an example. It's a nipple glued into a hole drilled thru the cap. It works, just not a visually appealing mod. I was thinking along the lines of bulkhead nipple ports to add simmilar to store bought but with a wider sealing flange. Just dustin' cobwebs outa the brain-box. butthead
TechnoScout	10/14/2020 08:45PM   I use the Sea-to-Summit 10L water bladder on my trips. I have two of them. I also use the Platypus Gravity filter. After the second year of just shoving the output of the filter down the throat of the S2S, I decided to design a coupler and print it on my 3D printer. Here it is!!