Click to View the Full Thread

Boundary Waters Quetico Forum :: Gear Forum :: Trying to identify a canoe
 
Author Message Text
thebotanyguy
06/21/2021 04:32PM
 
Unfortunately, the HIN on your boat does not include a Manufacturer Identification Code (MIC). That would indicate your boat is older than November 1, 1972, when the modern Hull Identification Numbers were standardized.


If there were a 3 letter MIC included in the HIN, it could be looked up:
Manufacturers Code List
 
Elwoodandnadine
06/17/2021 09:42PM
 
I have a canoe that someone thought might be a Sawyer, but I can't find a pic similar. I did find a Wenonah that looks similar. It is 18'4" long.

 
MReid
06/21/2021 10:21PM
 
Are you sure it applies to canoes? I just searched for Wenonah, Mad River and Old Town, and nothing came up.
 
MReid
06/22/2021 08:29AM
 
thebotanyguy: "MReid: "Are you sure it applies to canoes? I just searched for Wenonah, Mad River and Old Town, and nothing came up."


MFP = We-no-nah Canoe Inc.
MAD = Confluence Watersports Co (Mad River is one of their brands)
XTC = Johnson Outdoors (Old Town is one of their brands)"

I guess their search is less than straightforward, or I'm a putz, or both.
 
thebotanyguy
06/22/2021 07:09AM
 
MReid: "Are you sure it applies to canoes? I just searched for Wenonah, Mad River and Old Town, and nothing came up."


MFP = We-no-nah Canoe Inc.
MAD = Confluence Watersports Co (Mad River is one of their brands)
XTC = Johnson Outdoors (Old Town is one of their brands)
 
Jaywalker
06/18/2021 12:30PM
 
Those look to be the flotation running along the sides between the two seats, as there looks to be none in the bow or stearn. I’ve never seen that before.
 
Elwoodandnadine
06/18/2021 04:49PM
 
Here is the HIN 12653 tested it out and it barely floats Def needs bow n Stearns buoyancy. :)
 
MReid
06/18/2021 05:03PM
 
Looks like a chopper-gun boat. I bet that sucker is heavy! Heavy stuff doesn't float, well.
 
MReid
06/18/2021 02:01PM
 
Jaywalker: "Those look to be the flotation running along the sides between the two seats, as there looks to be none in the bow or stearn. I’ve never seen that before. "
I didn't notice that--never seen that. Def not Wenonah, mebbe a Sawyer that was modified. I'm guessing something else.
 
thebotanyguy
06/18/2021 04:25PM
 
Is a Hull Identification Number visible anywhere on the boat? The manufacturer code in the HIN can be helpful in identification.
 
jhb8426
06/24/2021 01:15AM
 
MReid: "Are you sure it applies to canoes?..."


Yes it does.
 
Jaywalker
06/19/2021 10:19AM
 
Elwoodandnadine: "Here is the HIN 12653 tested it out and it barely floats Def needs bow n Stearns buoyancy. :) " Of course, adding flotation to the bow and stearn (like most canoes have) will only help your canoe float better when its filled with water. Wont' do a thing for it while your are trying to paddle it.
 
andym
06/19/2021 03:10PM
 
Actually, additional floatation inside the boat will make it float a little bit lower. While the foam used is lighter than water, it is heavier than air.,


Now, you could add helium balloons. That would make it float higher.


I looked through some Sawyer catalogs in Hanssolo’s album and didn’t see any mention of side floatation.