Click to View the Full Thread

Boundary Waters Quetico Forum :: Group Forum: Boat Builders and Repair :: Has anyone built a canoe using Balsa wood?
 
Author Message Text
Grizzlyman
05/29/2019 12:08AM
 
My last boat if I remember was something like 15 lbs with just the cedar shell for a big 19 ft boat. I’m not sure how much you’ll save with balsa. Maybe a few lbs but as said previously- most of the weight is epoxy and the hardwood gunnels/ hardware.
 
bumabu
05/24/2019 06:55AM
 
Probably going to finally build a canoe this year and I am wondering if Balsa wood would be feasible for reduced weight. My thinking is that the actual strength comes from the sandwiching of the wood between layers of 4oz fiberglass, so would the strength if the wood really make a difference in the overall strength of the boat?
 
bumabu
05/29/2019 02:23PM
 
Thanks for the thoughts! Probably will stick to cedar.
 
bumabu
05/24/2019 10:14AM
 
Apparently its very hard to find balsa wood in lengths longer than 3 feet...
 
bumabu
05/24/2019 07:13AM
 
Interesting read on this topic
 
1JimD
05/24/2019 08:24AM
 
Yes interesting !


I tend to abuse my strippers a lot more ! But used as a Beach toy, I'm sure it would be OK !


Build one and let us know !


Jim




 
Arcola
05/24/2019 09:21PM
 
4oz. is like laminating with wet Nylon stockings in my opinion. I'm not to sure how much weight would be saved given the amount of glass you'd need to get good hull strength. Balsa core is a common material as you probably know, used in power boat bottoms. When they get wet (damage) they rot fast. Cedar being rot resistant, gets dis-colored, but doesn't melt like Balsa. I fear there would be alot of work for little return.