Boundary Waters Quetico Forum :: Group Forum: Boat Builders and Repair :: 2 of 4: Dibits in the floor
Author
Message Text
CabSauv
05/21/2021 11:37AM
When laying my strips, I got off my rhythm as I moved from vertical to horizontal. It looks fine on the outside but on the inside I ended up with dibits in the floor both bow and stern. My inclination is to lay the fiberglass cloth and then add enough epoxy to penetrate and fill the voids. Alternately, I could poor epoxy into the voids then add the cloth and roll epoxy over the inside. Thoughts?
sedges
05/21/2021 05:09PM
Mix epoxy with sanding dust if you have any, or flour. Make a smooth paste, spread it in and smooth it off. popsicle stick work great for this.
