Author |
Message Text |
bumabu
|
I just got a line on some salved 3/4 stock redwood taken out of a remodel job. Can pick it up cheap but wondering if it will be good to build with? I know it is about a third heavier than red cedar but the price is right. Anyone have any opinions, positive or negative, about this stuff?
|
bumabu
|
thanks dudes
|
Sparetime
|
I'm currently using redwood for a skin on frame kayak. I've found it easy to work with, I can't see any reason not to use it.
|
Cedarboy
|
We see alot of older stripper canoes around MN that were made from redwood. Probably from when redwood was alotm cheaper. They hold up great. I have used redwood as an accent piece in the sides, looks nice. I would build with it,no problem. My Mom has an old redwood picnic table(huge)that she wants to get rid of that may find its way into a boat some day. Good luck. CB
|
Bannock
|
Years ago redwood was the wood of choice for strippers. It is a bit heavier than cedar. Also I hear that it, unlike cedar, can splinter. It may mean you will have more waste and will need a few more strips.
I have also heard that occasionally there could be compatability issues with the wood and resins used. But I believe that was polyester resin and I believe you will use epoxy. Also that was long ago and may not be an issue any longer.
I don't think it is a bad choice and should be an interesting project. I say go for it.
|
jdevries
|
I used some to make one of those half of a boat looking shelving units once. It seemed a lot stiffer than cedar, harder to bend.
|