Boundary Waters Quetico Forum :: Group Forum: Boat Builders and Repair :: How Much Room?
|
Author | Message Text | ||
KevinL |
Woodcanoe that would be a great trade for you. It’s like 30 years worth of tools, started out Gunsmithing and then went into Tool & Die. I have one spot left on the wall at home (in my shop) for when I retire for my favorite of all. I purchased from a tool vender when he retired. Starrett - they are all American made (can’t say that any more as some of their tools are now made off shore, if they are even made). I currently have it at the college that I teach at for students to look at, and for me to drool over. Tool porn at its best ;-) |
||
RAFA Ranger |
|
||
woodcanoe |
If you give me your muzzleloader stuff you should have enough room to build one :) The length of your shop is fine. You're gonna need 10" width so you can work but that's going to make for some tight working space. I should mention that it is highly advantageous to be able to stand back and look at the canoe while stripping it. There is a lot to see on a canoe that you can't see from 2'away. Especially when checking to make sure your bow and stern are exactly plumb. This must be done from several feet back. So, clear out everything that doesn't have to be in the shop. Tom |
||
HighPlainsDrifter |
My shop is 13 X 20 (outside dimensions). This size was dictated by zoning set backs. It was built with retirement and my canoe project in mind. All of my equipment is movable. On one wall I have an 18' workbench. I wanted 18 foot of workspace for gunnel work. Heat is electric cove heaters. My canoe is 15.5 feet. At times I find it tight to get around but I have gotten used to it. I had some challenges when I wanted to turn a strip end for end. With the long ones, I opened the door and turned around outside. Biggest drawback is not being able to get far enough away from the canoe to look at my work |
||
KevinL |
|
||
jdevries |
JD |
||
KevinL |
I do have another shop available to prep and rip blanks. Thoughts? Thanks KL |
||
buffalodick |
If you can cut your strips outside or in another shop then all the room you need is enough space to walk around the canoe and a spot on a workbench long enough for the strips. I built two canoes in an area that was 12' X 20'. I did all the building and glassing indoors in the basement of my house and took the canoes out through a window. Dick |