Boundary Waters Quetico Forum :: Group Forum: Boat Builders and Repair :: injury that blind-sided me
|
Author | Message Text | ||
KevinL |
|
||
HighPlainsDrifter |
here is what I did ...... used a tool designed for low rpm in a high rpm router I was done with my decks but decided to change the white ash deck with black walnut. you will note that the walnut deck has a piece of rasp sticking in it. the tool basically had had enough and separated at the seam but she will look sweet when I get back to her |
||
GSP |
Where did you find your ash? |
||
HighPlainsDrifter |
GSP I bought my ash from Renneberg Hardwoods. They have a store in Brandon, SD which was a 60 mile drive for me. They had random lengths (about 9 footers) of 13/16 FAS/SEL. Beautiful wood. I ripped my gunwale stock to 5/8 and then used a scarf joint (1:8) to get the length I wanted. |
||
buffalodick |
Sorry to here about your injury. Heal up soon. By the way; your deck and inwales look awsome! Dick |
||
Cedarboy |
CB |
||
Jiimaan |
I certainly do appreciate your desire for perfection. The decks are critical for the overall aesthetics of the canoe and your decks, as they currently are made, are very nice. The ash trim idea would just be an interesting way of completely outlining the deck and visually setting off the carry handle. As long as the curve is fair, you should easily be able to steam bend a piece of ash to fit. And if you built a simple clamping jig, you should be able to get tight fit. Either way, you are building a spectacular canoe, so heal that hand and get back to work. I want to see pix of it on the water |
||
HighPlainsDrifter |
i cut my left hand pretty bad today working on my black walnut decks. 3 hours in the emergency room. i am very conscious of safe practices in my shop..... but, this accident blind-sided me because i did not think about the tool bit that i put in my high speed router ! i put a rotary drum rasp (fine for low rpm) in my router (table) to clean up the saw marks left after the band saw. these little saw dings were being followed by the bearing on my round over bit and producing dings in my edge....... so, i grabbed a drum rasp and put it in the router without a thought of what could happen. every thing was great. i finished my thwarts and carry handles. i was brushing up a tiny spot on my bow deck when the drum disintegrated....... the drum and the wood did a serious number on my hand. fortunately no tendons were cut........ some muscle, a couple veins, and lots of skin. something to think about besides keeping hands clear of tools......... all drum rasps are not designed for high speed. i got back on the horse right after the e-room. took a little courage to face my shop. my daughter and i went out to the shop to see just what i did wrong. in a way i was relieved to see the drum and shrapnel over the work bench. i realized what went wrong and also realized some of those pieces could have hit me in the face rather than the wall. my canoe still looks sweet........ no blood on her. |
||
jdevries |
JD |
||
Jiimaan |
|
||
HighPlainsDrifter |
Drew I studied the photos of your Bob's special when you posted them in the wood canoe thread. You did some nice work on the decks. The joints were tight and look good. Off hand, I think it would take some work to get a tight fit of the walnut and ash on that curve. It would have to be a tight fit to look good (and keep me happy)........ right now I am leaning toward the exposed endgrain |
||
Jiimaan |
Either way, it looks great. |
||
ladyspiller |
I did a number on my finger once while cleaning up a thwart on a router. 3 hrs in the emergency room for me too. Your canoe is absolutely stunning. You are making a fine heirloom. Best of luck as you finish the canoe. Tom |
||
HighPlainsDrifter |
Mr incognito I had been wondering about you. Long time no hear. Thanks for the thumbs up on my canoe. In many respects my encounter with you got me off the fence and into a strip project. Thank you. I am very gratified with this project even though my pride was hurt along with my hand. My hand is healing very nicely. Doc thinks that he can pull the drain on Friday. My pride in being a good and safe woodworker will take longer to heal :) Routers are a dangerous tool. After the fact, I am discovering how dangerous they can be. My router is set speed (25,000 rpm), and this speed is not safe for large diameter bits (like a bead and cove tool and others that I have used) I will be buying a new router with variable speed. Have my eye on a Bosch (2.25 HP, 12 Amps, 8,000-25,000 RPM). |
||
HighPlainsDrifter |
Not glued up. Not doing much with that hand right now....... but, I think I get what you say. But that would mean white (deck face) would hit white (inwale) I am thinking that your suggestion means to cover the face of the black walnut radius (that I traced using a coffee can) that faces the interior ???? |
||
Jiimaan |
|