|
04/19/2011 04:55PM |
Wile staples were only 22 gauge there were lots of holes and minor bruising, where the flat of the staple hit the board, despite the use of nylon strips.
I set a wet towel on the boat for a hour. Moisture content went to 35+%
Appearance of holes was reduced significantly. flat spots swelled.
I let it set overnight then sanded. moisture went down to 7.5% everything looks good. so I placed wet towels on rest of boat. It is not a big difference but it does help reduce appearance of holes.
The real test will be first coat of epoxy. maybe thursday?
|
04/19/2011 09:17PM |