Author |
Message Text |
DanCooke
|
June 4th I will do another Freestyle Paddle night at Golden Lake launching from the Anoka County Park landing in Circle Pines MN 55014. 6-8 PM
|
WHendrix
|
Dan. I was hoping you would reply. Are you having your Thursday evening paddle at Circle Pines any time in the near future ? If so I'll come for that and could look at a paddle or two then.
Bill
|
WHendrix
|
I'm thinking of making a free style paddle and looking for some guidance on where to look for dimensions. I did a search for free style paddles and found several images but no specifications. In their book "Canoe Paddles", Warren and Gidmark give detailed specs. for a Sugar Island paddle that looks pretty close. The first paddle I made actually was a Sugar Island, but I went over the top a bit with hardwood and it is way to heavy. Any suggestions ?
Bill
|
Blatz
|
Maybe ask these fine people freestylecanoeing.com
|
DanCooke
|
check out Marc's Facebook Page - Dogpaddle Canoe and Woodworks
Then check out Quimby Paddles Quimby Paddles
information on the Carbon Fiber Moore Cue is falling off the web. A very good paddle, super fine edges, symmetrical with not a flutter on your in the water recovery's
No dimensions- if you are located in the Mpls St Paul area you would be welcome to inspect several Good freestyle paddles. Send an e mail to dancooke@cookecustomsewing.com to set up a viewing of paddles.
|
WHendrix
|
Thanks Dan. I will try to be there. I'll send you an email next week to confirm. As I recall, you are usually doing some instruction on freestyle paddling so I assume you will have a good paddle or two.
Bill
|