BWCA 2 of 4: Dibits in the floor Boundary Waters Group Forum: Builders Group
Chat Rooms (0 Chatting)  |  Search  |   Login/Join
* For the benefit of the community, commercial posting is not allowed.
Boundary Waters Quetico Forum
   Group Forum: Builders Group
      2 of 4: Dibits in the floor     



distinguished member (194)distinguished memberdistinguished memberdistinguished member
05/21/2021 11:37AM  
When laying my strips, I got off my rhythm as I moved from vertical to horizontal. It looks fine on the outside but on the inside I ended up with dibits in the floor both bow and stern. My inclination is to lay the fiberglass cloth and then add enough epoxy to penetrate and fill the voids. Alternately, I could poor epoxy into the voids then add the cloth and roll epoxy over the inside. Thoughts?
      Print Top Bottom Previous Next
distinguished member(865)distinguished memberdistinguished memberdistinguished memberdistinguished member
05/21/2021 05:09PM  
Mix epoxy with sanding dust if you have any, or flour. Make a smooth paste, spread it in and smooth it off. popsicle stick work great for this.
      Print Top Bottom Previous Next

Community Links

 Poll: Should we keep trip reports in the listening point forum?
(117 responses)